基于F-范数的不确定性平差模型的解算方法     

鲁铁定  朱国红 《大地测量与地球动力学》2018,38(6):557-561

为提高基于F-范数的不确定性平差模型的解算效率，给出直接迭代算法进行参数估计。该算法无需SVD，解算过程简单且易于编程计算，同时给出迭代不收敛时的SVD-解方程算法。二元线性拟合及沉降观测AR模型的算例结果表明，这2种算法正确可行，与SVD-迭代算法具有等价性。当迭代收敛时，宜使用直接迭代算法，收敛速度更快，解算效率更高；当迭代不收敛时，可釆用SVD-解方程算法。  相似文献   

Bearing capacity of offshore umbrella suction anchor foundation in silty soil under varying loading modes     

Qi Yang  Guanglai Pan  Quandi Wang 《Marine Georesources & Geotechnology》2018,36(7):781-794

Considering the current disadvantages of present offshore wind turbine foundations, a novel anchor foundation with skirt and branches is proposed, called offshore umbrella suction anchor foundation (USAF). A series of experiments and numerical simulations were performed to explore the bearing capacity of the USAF under various kinds of loading modes. The bearing characteristics and the anchor–soil interactions are described in detail for horizontal static loading, horizontal cyclic loading, and an antidrawing (pullout) test in silty soil. In the static loading test, the load–deflection of the anchor under step loading was analyzed and the normalized curve of the load–deflection was obtained to determine the ultimate horizontal bearing capacity of the anchor under normal working conditions. Under horizontal cyclic loading, the relationship between the plastic cumulative deformation and cyclic number was determined. In addition, the responses of USAF were investigated for a low wave frequency and storm surges. In the drawing test, it was found that a “segmentation phenomenon” occurred during the test. Moreover, a method to identify the maximum antidrawing load of USAF was provided based on dynamic mechanics. The numerical results show that the use of anchor branches and skirt can enhance the bearing performance of USAF to a certain degree. However, the anchor branch has a slight positive influence on the bearing performance improvement. The USAF is not only similar to a stiff short pile, but a rotation occurs. The failure envelope under composite loading (V-M) was obtained and the changes associated with changes in the aspect ratio of the internal compartment were clarified.  相似文献   

利用短期静态PPP结果反演海潮负荷位移     

魏国光  王琪洁  彭葳  郭良琦 《大地测量与地球动力学》2019,39(6):607-612

采用香港11个GPS测站的观测资料进行1 h、2 h、3 h和4h静态PPP解算，获得4组PPP坐标序列，利用调和分析求取11个测站处8个主要分潮的负荷位移参数（振幅和相位），将其与海潮模型计算的负荷位移参数进行对比，并比较分析PPP反演值与海潮模型值改正海潮负荷信号的效果。结果表明，垂直和水平方向上，不同PPP结果反演8个分潮的负荷位移分别具有约5 mm和7 mm的差异；PPP反演8个分潮垂向负荷位移优于全球海潮模型，但水平方向上的反演效果稍弱。  相似文献   

基于蚁群算法的城市可持续发展综合评价   总被引：1，自引：0，他引：1  

徐婷婷  于扬  彭娇婷 《成都信息工程学院学报》2006,21(5):694-697

在可持续发展体系分类的基础上，应用蚁群算法对可持续发展各分类指数公式和综合指数公式进行优化，建立可持续发展评价模型。将该模型应用于乌鲁木齐市可持续发展水平评价，评价结果与现状分析一敛。结果表明该模型简单适用、有良好的通用性。  相似文献   

分组密码的安全性与强化设计     

刘峰 《成都信息工程学院学报》2003,18(4):376-380

分组密码是数据通讯中最常用的数据加密方式，以DES为例分析现有分组加密算法的安全隐患，并提出了可变密钥加密和变长密文输出两个新思路，可应用于所有现有分组加密算法以提高安全性，并就该方法的安全性、效率、具体应用做出了分析。  相似文献   

Initial interpretation of Titan plasma interaction as observed by the Cassini plasma spectrometer: Comparisons with Voyager 1     

R.E. Hartle  E.C. Sittler  R.E. Johnson  F. Crary  D.T. Young  D. Simpson  D. Reisenfeld  J.J. Berthelier  J. Vilppola  N. Andre 《Planetary and Space Science》2006,54(12):1211-1224

The Cassini plasma spectrometer (CAPS) instrument made measurements of Titan's plasma environment when the Cassini Orbiter flew through the moon's plasma wake October 26, 2004 (flyby TA). Initial CAPS ion and electron measurements from this encounter will be compared with measurements made by the Voyager 1 plasma science instrument (PLS). The comparisons will be used to evaluate previous interpretations and predictions of the Titan plasma environment that have been made using PLS measurements. The plasma wake trajectories of flyby TA and Voyager 1 are similar because they occurred when Titan was near Saturn's local noon. These similarities make possible direct, meaningful comparisons between the various plasma wake measurements. They lead to the following: (A) The light and heavy ions, H⁺and N⁺/O⁺, were observed by PLS in Saturn's magnetosphere in the vicinity of Titan while the higher mass resolution of CAPS yielded H⁺ and H₂⁺as the light constituents and O⁺/CH₄⁺ as the heavy ions. (B) Finite gyroradius effects were apparent in PLS and CAPS measurements of ambient O⁺ ions as a result of their absorption by Titan's extended atmosphere. (C) The principal pickup ions inferred from both PLS and CAPS measurements are H⁺, H₂⁺, N⁺, CH₄⁺ and N₂⁺. (D) The inference that heavy pickup ions, observed by PLS, were in narrow beam distributions was empirically established by the CAPS measurements. (E) Slowing down of the ambient plasma due to pickup ion mass loading was observed by both instruments on the anti-Saturn side of Titan. (F) Strong mass loading just outside the ionotail by a heavy ion such as N₂⁺ is apparent in PLS and CAPS measurements. (G) Except for the expected differences due to the differing trajectories, the magnitudes and structures of the electron densities and temperatures observed by both instruments are similar. The high-energy electron bite-out observed by PLS in the magnetotail is consistent with that observed by CAPS.  相似文献   

用遗传算法对自动控制系统数学模型寻优     

万月珍  廖成旺 《大地测量与地球动力学》2001,21(2):87-93

探讨用遗传算法对数学模型进行优化。考虑到控制系统稳健性的要求 ,用遗传算法寻找出控制系统最佳稳定域 ,实现控制系统数学模型的寻优。阐述了用遗传算法求解问题的步骤和参数的取值 ,并用仿真实验对优化结果进行了检验。结果表明 :在控制系统数学模型的优化中 ,遗传算法具有其他算法无可比拟的优越性。  相似文献   

三峡库首区重点断裂围限区蓄水的加卸载效应     

陈蜀俊  姚运生  蔡永建 《大地测量与地球动力学》2006,26(4):97-101

通过对蓄水前后三峡库首区构造应力场进行三维数值模拟发现,相对于蓄水前,蓄水至135 m水位时,官渡口断裂-马鹿池断裂-牛口断裂围限区、秭归地理中心和九湾溪断裂带,出现了4个主应力下降区和共轭的主应力增长区,形成了差应力场;175 m水位与135 m水位相比,局部差应力场呈现逆向变化,即形成了加载效应与卸载效应的交替过程。这一过程,可能是水库诱发地震的诱震(或触震)因素。  相似文献   

矢量数据栅格化的一种有效方法——环绕数法   总被引：4，自引：0，他引：4  

武广臣  左建章  刘艳  李丽 《测绘科学》2009,34(1)

矢量数据栅格化是GIS数据处理的一项重要任务。目前,已存在多种栅格化方法,但是每种方法都有各自的局限性。本文首次提出了环绕数法,它基于计算几何转角理论,通过计算跨越数来确定环绕数,是一种简单、高效、易于实现的栅格化方法。应用环绕数法,不但可以完成简单多边形的栅格化,而且可以完成自交多边形的栅格化。  相似文献   

Three-dimensional discontinuous deformation analysis (3-D DDA) using a new contact resolution algorithm     

S. Amir Reza Beyabanaki  Roozbeh Geraili Mikola  Kianoosh Hatami   《Computers and Geotechnics》2008,35(3):346-356

This paper presents a new contact calculating algorithm for contacts between two polyhedra with planar boundaries in the three-dimensional discontinuous deformation analysis (3-D DDA). In this algorithm, all six type contacts in 3-D (vertex-to-face, vertex-to-edge, vertex-to-vertex, face-to-face, edge-to-edge, and edge-to-face) are simply transformed into the form of point-to-face contacts. The presented algorithm is a simple and efficient method and it can be easily coded into a computer program. In this paper, formulations of normal contact, shear contact and frictional force submatrices based on the new method are derived and the algorithm has been programmed in VC⁺⁺. Examples are provided to demonstrate the new contact rule between two blocks.  相似文献